What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 05:37
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
How one of San Francisco's most successful new chains 'just kind of happened' - SFGATE
In schematic diagrams this is the symbol for a fuse:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is where the MOV conducts again, and dissipated the energy.
Black holes don’t behave as we thought, study finds - The Brighter Side of News
At least they know the answer if they wanted it.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
At one ohm, the resistor has a maximum of 1 watt power.
Scientists find that major Earth systems are on the verge of total collapse - Earth.com
I post the exact comment here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
the problem then depends on "how fast does the fuse operate?".
eight
One
Fireball streaks through aurora-filled skies photo of the day for June 5, 2025 - Space
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Barnstars:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
The ‘golden summer of cheap flights’: Now’s the time for last-minute deals - CNN
The third is lightning and “how it gets conducted into a home.”
But… the neutral is now “floating” because of the 1 ohm resistance.
what exactly is a ‘surge’ protector?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Edit 2024–10.
One is “what exactly is in a ‘surge protector’ ? ”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The other is “what does a “fuse” do?”
These are simplified answers to the original question, and does not change anything I wrote above.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
a photo is worth a thousand words.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Hailee Steinfeld & Josh Allen marry in west coast ceremony - Buffalo Rumblings
These devices are installed between the “hot” and “neutral” and protective ground.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–10[John johnson John Johnson ]
A circuit breaker is similar, but is resettable.
mRNA, once lauded as a scientific marvel, is now a government target - statnews.com
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Semiconductor Supplier GlobalFoundries to Spend $16B to Boost US Chip Production - Investopedia
Upvotes:
This device then solves the entire problem.
So, the voltage could go up to 500 volts, and the fuse will not open up.
so, what happens?
but I think this circuit , shows a few more pieces.
For this case there are devices called Metal oxide varistors (MOV).
Marin health officer urges quick COVID vaccination - Marin Independent Journal
This one hit behind the barn.
An AC voltage/ current source, and an ac inductive load.
It also is a device that limits the change in current flow.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There are two important concepts here.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[old diagram got deleted by accident]
But it can get overloaded, and no longer works.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What is lightning?
He then asserts :
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
What does a fuse do?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–14 [Omar Gharbi Omar Gharbi ]
A fuse is a non-resetable over current circuit protector.
There are three different concepts here that are getting confused.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
(Dc diagram shown, AC is similar).
Here is a simplified AC power diagram.
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but this device (an Inductor) … impedes the rapid changes in the current.
He then describes the function of a fuse.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The bolt then partially travels down the line to your home.
First Sentence:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
It seems Mohan does not understand the difference between a comment and an Answer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is 'the assistant's answer'
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–16 [ OO OLAOYE OYEBODE ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
[image of Common-mode choke]